The CLASSIC System...you'll be more than pleased.
Carbide Reamers
Made exclusively for our CLASSIC Ream System, we are proud to offer the ultimate in precision, speed and durability. Custom made to exacting specifications, with carbide inserts that run through both the flute and pilot portion of the reamers. These new tools are to be spun at approximately 1000 RPM under load, and life of the reamer is expected to be many times that of quality high-speed steel reamers. Used in conjunction with the CLASSIC Ream System, precise on-size new guide holes are assured.
REAMER SIZE
5mm
5.5mm
6mm
6.6mm
7mm
SIZE
.216˝
.250˝
.266˝
.291˝
.308˝
PART NO.
2028-C
2026-C
2024-C
2006-C
2007-C
REAMER SIZE
5/16˝
8mm
11/32˝
9mm
3/8˝
SIZE
.341˝
.346˝
.372˝
.385˝
.404˝
PART NO.
2005-C
2008-C
2012-C
2018-C
2014-C
Reamer Bushings
Hardened reamer bushings are designed to ride the shaft of carbide reamers and fit precisely into seat collars. An O-ring on the lower portion holds the seat collar onto these bushings to form an assembly.
FITS CARBIDE
REAMER NO.
5mm
5.5mm
6mm
6.6mm
7mm
5/16˝
8mm
11/32˝
9mm
3/8˝
PART
NO.
6202
6205
6200
6199
6199
6198
6198
6198
6198
6198
Reamer Kits
Each kit contains a reamer bushing, spring, retaining collar and hex wrench, to be used with carbide boring tools.
PART NO.
2000 Reamer Kit for 5/16˝, 8mm, 11/32˝, 9mm and 3/8˝
2001 Reamer Kit for 6.6mm and 7mm
2002 Reamer Kit for 5.5mm
2003 Reamer Kit for 6mm
2004 Reamer Kit for 5mm
CONTACT MICHIGAN ENGINE SUPPLIES
Phone US : 269.264.1200 or 800.393.0544
Phone CN: 519.881.0028 or 866.881.0028
Copyright © 2018 Michigan Engine Supplies, Inc.